Back to catalogue
Bilge Pumps

1100GPH Automatic Submersible Boat Bilge Pump 24V

SKU: MXCH80281100A

$68.75
Request a quote

Keep your boat's bilge clear of unwanted water with this 24V 1100GPH automatic submersible bilge pump, available from Port O' Call Boating in Warana on the Sunshine Coast. Designed for marine applications, this electric pump automatically removes accumulated bilge water without requiring a separate float switch. With a nominal pumping capacity of approximately 4,164 litres per hour, it provides efficient drainage for compatible 24V vessels.

Key benefits

Key Benefits

  • - 1100GPH nominal pumping capacity
  • - 24V DC electric operation
  • - Automatic bilge water removal
  • - Integrated automatic control system
  • - No separate external float switch required
  • - Compact submersible design
  • - Suitable for freshwater and saltwater bilge applications
  • - Helps reduce unwanted water accumulation
  • - Ideal for new installations and replacement pumps

Specifications & Dimensions

  • - Product Type: Automatic Submersible Bilge Pump
  • - Voltage: 24V DC
  • - Nominal Flow Rate: 1100 US gallons per hour
  • - Metric Flow Rate: Approximately 4,164L/h (69.4L/min)
  • - Operation: Automatic
  • - Pump Design: Submersible centrifugal
  • - Automatic Control: Integrated

Suitable Applications

  • - Recreational powerboats
  • - Fishing boats
  • - Cabin cruisers
  • - Commercial vessels with 24V electrical systems
  • - Larger trailer boats
  • - Auxiliary bilge drainage installations
  • - Replacement automatic bilge pump systems

Important Installation & Fitment Information

  • - Suitable for 24V DC electrical systems only.
  • - Confirm the discharge outlet diameter before purchasing a hose.
  • - Install at the lowest practical point in the bilge.
  • - Use marine-grade wiring and correctly rated circuit protection.
  • - Keep the inlet and automatic sensing mechanism clear of debris.
  • - Check that the automatic control operates correctly after installation.
  • - Actual pumping capacity decreases with discharge height and hose restrictions.
  • - Not suitable for pumping fuel, oil or flammable liquids.
  • - Do not rely on this pump as the vessel's only emergency dewatering system.

Signs the Bilge Pump Needs Replacing

  • - Pump fails to activate when water accumulates
  • - Pump runs continuously without switching off
  • - Reduced or inconsistent water discharge
  • - Excessive motor noise or vibration
  • - Blocked or damaged impeller
  • - Corroded electrical connections
  • - Cracked or damaged pump housing
  • - Intermittent automatic operation

Shipping

Ships Australia-wide