The 91530 8" Red Poly Flat Bilge Roller is a soft polyurethane boat trailer roller designed to provide broad, non-marking hull support during launching, retrieval and transport. Measuring approximately 203mm wide × 72mm nominal diameter with a 21mm centre bore, it is designed for use with a 20mm spindle. Its UV-stable red polyurethane construction is particularly suitable for fibreglass boats where softer hull contact and reduced marking are important.
Boat Trailer Rollers - Red
8" Flat Bilge Roller 72mm Red 21mm Bore
SKU: V-91530
$45.10
Key benefits
Key Benefits
- 8" / 203mm overall width
- 72mm / 2.83" nominal outside diameter
- 21mm / 0.827" centre bore
- Designed for a 20mm / 0.787" spindle
- Soft red polyurethane construction
- Non-marking hull contact
- UV-stable material
- Flat bilge profile provides broad hull support
- Machined from a solid piece of material
- Particularly suitable for fibreglass boats
Dimensions
- Overall Width: 203mm / 8"
- Outside Diameter: 72mm / 2.835" (approx. 2-13/16") nominal
- Centre Bore: 21mm / 0.827" (approx. 13/16")
- Recommended Spindle: 20mm / 0.787" (approx. 25/32")
Suitable Applications
- The 91530 is suitable for boat trailer bilge, hull-support and centre roller assemblies requiring a wide, soft roller. The softer red polyurethane is designed to be less abrasive and non-marking, making this roller particularly suitable for fibreglass boats.
Signs the Roller Needs Replacing
- Replace the roller if the polyurethane becomes deeply grooved, cracked, distorted, excessively flattened, seized or loose around the centre bore. When replacing it, also inspect the 20mm spindle for corrosion, bending and excessive wear.
Shipping
Ships Australia-wide