Back to catalogue
Bilge Pumps – Manual, Automatic & Electric Marine Bilge Pumps

SEAFLO SFSP1-476-00301 12V Self-Priming Water Transfer Pump – 8GPM / 30LPM

SKU: SFSP1-476-00301

$140.00
Request a quote

The SEAFLO SFSP1-476-00301 Self-Priming Water Transfer Pump is a versatile 12V electric pump designed for transferring water in marine and general-purpose applications. Delivering a nominal flow rate of 30 litres per minute (8GPM), it provides a convenient solution for bilge water removal, water transfer and compatible onboard pumping tasks. Its self-priming design allows flexible installation without requiring the pump to remain submerged.

Key benefits

Key Benefits

  • - 12V DC operation for marine electrical systems.
  • - Nominal 30L/min (8GPM) water flow.
  • - Self-priming operation.
  • - Suitable for compatible bilge water transfer applications.
  • - Can be installed outside the water being pumped.
  • - Useful for portable and fixed water transfer installations.
  • - Compact electric pump for convenient onboard use.

Specifications & Dimensions

  • - Part Number: SFSP1-476-00301
  • - Brand: SEAFLO
  • - Product Type: Self-priming electric water transfer pump
  • - Operating Voltage: 12V DC
  • - Nominal Flow Rate: 30L/min (8 US gallons per minute)
  • - Pump Operation: Electric motor-driven
  • - Priming: Self-priming
  • - Installation: External mounting, subject to installation instructions
  • - Power Supply: 12V battery or suitable DC supply

Suitable Applications

  • - Marine bilge water transfer.
  • - Boat maintenance and water removal.
  • - Portable water transfer systems.
  • - Draining accessible compartments and containers.
  • - General-purpose water transfer where the pump's specifications permit.

Important Installation Information

  • - Connect to a suitable 12V DC electrical supply.
  • - Install with correctly rated wiring and circuit protection.
  • - Confirm inlet and outlet fitting sizes before purchasing hoses.
  • - Follow the manufacturer's installation instructions for suction lift and mounting position.
  • - Protect electrical connections against moisture and corrosion.
  • - Check the pump's permitted duty cycle before continuous operation.
  • - Do not use for petrol, diesel, solvents or other flammable liquids unless explicitly approved.
  • - Do not use as the sole bilge pumping system on a vessel without confirming suitability for that safety-critical application.

Signs the Pump Needs Replacing

  • - Motor fails to operate despite a verified electrical supply.
  • - Reduced or inconsistent water flow.
  • - Pump fails to prime despite clear suction plumbing.
  • - Unusual motor noise or vibration.
  • - Water leaking from the pump housing or seals.
  • - Excessive current draw or repeated fuse failure.

Shipping

Ships Australia-wide