Back to catalogue
Sprays, Lubricants & Protectants – Marine Maintenance Products

Valvoline WD Spray Lube Multispray 400g – 8681

Brand: VALVOLINE

SKU: VA-8681

$18.45
Request a quote

Valvoline WD Spray Lube Multispray 400g is a versatile multipurpose lubricant designed to protect metal components against rust and corrosion. Formulated with synthetic corrosion inhibitors and water-displacing properties, it penetrates hard-to-reach areas while leaving a transparent, non-staining protective film. Ideal for marine, automotive and workshop applications, it helps lubricate moving parts, loosen corroded fittings and protect electrical components against moisture-related problems during routine maintenance.

Key benefits

Key Benefits

  • - Multipurpose lubricant and rust preventative.
  • - Contains synthetic corrosion inhibitors.
  • - Formulated with Tectyl rust-prevention technology.
  • - Displaces moisture from metal surfaces.
  • - Leaves a transparent, non-staining, non-sticking protective film.
  • - Penetrates difficult-to-reach areas.
  • - Helps loosen rusted and corroded components.
  • - Lubricates moving mechanical parts.
  • - Helps reduce moisture-related electrical and ignition problems.
  • - Suitable for marine, automotive, household and industrial use.

Specifications & Dimensions

  • - Manufacturer: Valvoline
  • - Part Number: 8681
  • - Product Name: WD Spray Lube Multispray
  • - Alternative Product Name: Valvoline 1299WD Multispray
  • - Product Type: Multipurpose penetrating lubricant and rust preventative
  • - Formulation: Solvent-based aerosol with synthetic corrosion inhibitors
  • - Container Size: 400g (0.4kg / 14.1oz)
  • - Application Method: Aerosol spray
  • - Protective Film: Transparent, non-staining and non-sticking
  • - Water Displacement: Yes
  • - Corrosion Protection: Yes
  • - Penetrating Lubrication: Yes
  • - Recommended Spray Distance: 15–20cm (5.9–7.9")
  • - Hazard Classification: Extremely flammable aerosol

Suitable Marine Applications

  • - Outboard motor external metal components.
  • - Marine engine linkages and pivot points.
  • - Boat trailer hinges and mechanical fittings.
  • - Stainless steel and metal fasteners.
  • - Marine electrical terminals where appropriate.
  • - Boat hardware and fittings.
  • - Steering and throttle linkages where approved.
  • - Corroded nuts, bolts and screws.
  • - General boat maintenance and corrosion prevention.

Suitable Automotive & Workshop Applications

  • - Door hinges and locks.
  • - Automotive mechanical linkages.
  • - Workshop tools and equipment.
  • - Agricultural machinery.
  • - Metal fittings and fasteners.
  • - Industrial machinery maintenance.
  • - Moisture-affected electrical connections where suitable.

Directions for Use

  • - Shake the aerosol can before use.
  • - Ensure the application area is clean and accessible.
  • - Hold the can upright approximately 15–20cm from the surface.
  • - Spray directly onto the component requiring lubrication or protection.
  • - Allow the product to penetrate tight or corroded areas.
  • - Wipe away excess spray where necessary.
  • - Remove unwanted overspray using a compatible solvent or degreaser.

Important Safety & Application Information

  • - Extremely flammable aerosol.
  • - Keep away from flames, sparks, hot surfaces and ignition sources.
  • - Do not spray onto hot engines or exhaust components.
  • - Use in a well-ventilated area.
  • - Avoid inhaling vapours or aerosol mist.
  • - Wear suitable eye and skin protection.
  • - Check compatibility before applying to rubber, plastics, paint or sensitive electrical components.
  • - Isolate electrical equipment before applying.
  • - Do not use on brake friction surfaces.
  • - Do not use as a substitute for specified bearing grease or hydraulic fluid.
  • - Prevent discharge into waterways, drains or soil.
  • - Store away from direct sunlight and excessive heat.

Signs Lubrication or Corrosion Protection Is Needed

  • - Squeaking or stiff mechanical linkages.
  • - Rust forming on exposed metal components.
  • - Seized or difficult-to-remove fasteners.
  • - Moisture accumulation around suitable metal fittings.
  • - Hinges or moving parts becoming difficult to operate.
  • - Surface corrosion appearing on tools or equipment.

Shipping

No shipping required